Page 56 - Bronze Wallpaper

MURAL TEXTURES & MATERIAL

1-Textile Back
We would like to announce that we have started the production of Textile Backed
Posters / Murals. Our textile back wallpaper has 300cm height and the weight is
285gr / m2. We can print all our Mural designs or your custom designs in one piece
POSTER (MURAL) INSTALLING INSTRUCTIONS as 1 roll. Therefore, there is joint lines on your design anymore. Please contact us for
your Textile Backed / Vinyl Surface Mural orders.
1-Checking The Product
Check the panel number and pattern before apply ng the wallpaper adhes ve. F rst , lay panels face
down on a at surface and ensure the panel patterns match w th each other. 5#/2.'
Then, apply the adhes ve at the back of wallpaper.

2. Applying The Product
After you make sure the f rst and the second panel overlap all jo n ng edges by 0,3mm or 0,7mm , start
nstall ng the product. (Repeat steps for rema n ng panels)

3. Trimming The Joining Edges
Use a stra ght edge and cut o the excess edges carefully w th a kn fe.

4. Completing The Installation )QNF 5KNXGT 2GCTN 9JKVG
Apply the panel onto the wall us ng a soft dry cloth or a rubber squeegee. Work from top to bottom
tak ng extra care not to overwork each panel.

USEFUL TIPS FOR THE INSTALLATION
2-NonWoven Back
Our nonwoven back wallpaper has 105cm height and the weight is 280gr / m2. When
1. Make sure wall surface clean and smooth.
you want to print on nonwoven-based paper in the dimensions you want, the number
2. Dur ng the nstallat on, the adhes ve must be evenly appl ed between the wall and the product of pieces will change according to your wall size. We can print all our Mural designs
by us ng a spud or a brush. QT [QWT EWUVQO FGUKIPU KP ǣXG FKǢGTGPV VGZVWTG PQPYQXGP DCEMGF RCRGT 2NGCUG EQP-
tact us for your Textile Backed / Vinyl Surface Mural orders.
3. After wallpaper adhes ve , nstallat on of the product must be f n shed n 10-20 m n.
5#/2.'
4. S nce the placement of the f rst panel determ nes the overall look of the f n shed mural, take
extra t me and care to place t accurately. Use a level and a plumb l ne.

5. F rst ,make sure the second pattern overlaps the f rst one on the jo n ng edges by approx mately
0,3mm-0,7mm. Then hang the rema n ng panel.

6. Take extra care to make sure not to get adhes ve on the patterned s de wh lst jo n ng the edges.
Hard objects l ke spuds and rollers can harm the surface of the product. They must be used w th
extra care.

7. The backs de of the product s nonwoven paper and s produced n 105 cm w dth. Spec al order
n d erent des gns s ava lable . For further nformat on please contact w th our team.

6GZVWTG 6GZVWTG 6GZVWTG 6GZVWTG 6GZVWTG

108 109